01283 791969 enquiries@elastothane.com
Elastoline metal coatings are 1:1, fast-set, spray applied two-component polyureas, polyurethanes and hybrids. offering excellent impact, abrasion, corrosion and chemical resistance, our metal coatings are widely used in the automotive, steel tank and pipe and renewables energy sector. Our coatings can protect and endure far beyond standard paints, providing extreme electrical insulation as well as reducing sound and vibration, making them ideal in even the heaviest of industrial applications.

Coating Characteristics

  • Abrasion Resistant
  • Corrosion Resitant
  • Impact Resistant
  • Vibration Reduction
  • Noise Reduction
  • Chemical Resitant
  • Electrical Insulation
  • Quick Return To Service
  • Suitable for Permanent Immersion
  • Ideal Marine Coating
  • Minimal surface Prepartion
  • Elastoline CG is a 1:1, fast setting, spray applied two component UV stabilised hybrid polyurea coating. It is 100% solids and contains no VOC’s. CG has been formulated as a protective coating for industrial applications, and is typically used to coat metal and wood such as automotive parts, speakers and flight cases. CG has been developed to protect substrates in the most hostile environments also making it ideal for marine based applications. TENSILE STRENGTH
    ELONGATION
    HARDNESS, SHORE D
    GEL TIME, SECONDS
    18 N/mm ²
    500%
    40-50
    5
    Elastoline 6070 is 1:1, fast setting, spray applied two component hybrid polyurea coating. It is 100% solids and contains no VOCs. It has been developed to offer extreme properties many appliciations including: blast mitigation, chemical bunds, primary and secondary containment, marine envirmonment, long term immersion work in water, wastewater and sewage.

    Elastoline 6070 is unique and in its formulation as it contains the same raw materials used to make Lycra making it the ultimate hybrid polyurea coating technology.
    TENSILE STRENGTH
    ELONGATION
    HARDNESS SHORE A
    GEL TIME, SECONDS
    TACK FRRE TIME, SECONDS
    >18 N/mm ²
    >400%
    65
    5
    15
    Elastoline 7065.05 is a 5 second gel time, 1:1, fast-set, spray applied two-component pure polyurea coating. The good all round properties make this an ideal pure polyurea for waterproofing and corrosion resistance onto steel and concrete substrates. Elastoline 7065.05 can be applied direct to metal over blasted steel to SA2.5. TENSILE STRENGTH
    ELONGATION
    IMPACT STRENGTH
    HARDNESS, SHORE D
    GEL TIME, SECONDS
    18 N/mm ²
    600%
    >700 inch lbs
    50
    5
    Elastoline 2266 is a 1:1, direct to metal , spray applied polyurethane coating. It is 100% solidsand contains zero VOC's. Elastoline 2266 has been formulated as a tough, abrasion and corrosion resistant coating for metal substrates that are permanently immersed in salt or fresh water. Widley used in the renewable energy sector as a coating for on-shore and off-shore wind turbine components. Elastoline 2266 is also suited as a tank lining and pipeline coating system.

    please contact an Elastothane representitve for a data sheet and more information.
    SOLIDS,
    MIX RATIO
    TENSILE STRENGTH
    HARDNES SHORE D,
    WATER ABSORPTION,
    100%
    1:1
    >3200 psi
    73
    <1.5%
    Home

    About Elastothane

    Gallery

    Application Equipment

    Contact Us

    Foam & EPS Coatings

    Metal Coatings

    Wood Coatings

    Concrete Coatings

    Linings For Moulds

    Hand Applied Polyurea

    Pourable PU Foam

    Spray PU Foam

    Primers

    Elastothane Ltd
    Agric House
    Long Lane
    Fradley
    WS13 8NT

    TEL: 01283 791969
    EMAIL: enquiries@elastothane.com


    follow Us!