01283 791969 enquiries@elastothane.com
Elastothane concrete coatings are 1:1 spray applied, 100% solids, zero V.O.C's and sets in seconds. Offering a seamless monolithic barrier, with unlimited film build, our highly chemical resistant concrete coatings suit all manner of applications. With the addition of geotextile as a substrate, you can create primary and secondary containment, landfill vapour barriers, and liners on to just about any substrate. Typical applications are; primary & secondary containment, vapour barriers, floors, roofs, car park decks, waterproofing, sewage, salt and fresh water treatment plants.
Elastoline 6050 is applied to concrete and forms a durable, flexible, seamless liner for use in primary and secondary containment applications. It is ideal for preventing leaks and containing spills of wastewater, fuels, and many other chemicals. Elastoline 6050 has exceptional resistance to impact, disbondment, and chemical attack. Typical applications for Elastoline 6050 include wastewater containment, chemical containment and spill control, fuel loading and unloading stations, water ponds, vapour barriers and landfills. Elastoline 6050 should be applied with Elastoprime 3558 Concrete Primer for best results. HARDNESS, SHORE D
TENSILE STRENGTH
ELONGATION
GEL TIME, SECONDS
45
19 (N/mm²)
300%
20
Elastoline 6060 is a 1:1, fast-set, spray applied two-component polyurea coating. It is 100% solids and contains zero VOC’s. Elastoline 6060 is specifically designed for application to geotextile fabric to form a durable, flexible, seamless liner for use in primary and secondary containment applications. It is ideal for preventing leaks and containing spills of wastewater, fuels, and many other chemicals. Elastoline 6060 has exceptional resistance to impact and chemical attack. Typical applications for Elastoline 6060 include wastewater containment, chemical containment and spill control, fuel loading HARDNESS, SHORE D
TENSILE STRENGTH
ELONGATION
GEL TIME, SECONDS
40
>10(N/mm²)
280%
10
Elastoline 6070 is 1:1, fast setting, spray applied two component hybrid polyurea coating. It is 100% solids and contains no VOCs. It has been developed to offer extreme properties many appliciations including: blast mitigation, chemical bunds, primary and secondary containment, marine envirmonment, long term immersion work in water, wastewater and sewage.

Elastoline 6070 is unique and in its formulation as it contains the same raw materials used to make Lycra making it the ultimate hybrid polyurea coating technology.
TENSILE STRENGTH
ELONGATION
HARDNESS SHORE A
GEL TIME, SECONDS
TACK FRRE TIME, SECONDS
>18 N/mm ²
>400%
65
5
15
Elastoline 7065.05 is a 5 second gel time, 1:1, fast-set, spray applied two-component pure polyurea coating. The good all round properties make this an ideal pure polyurea for waterproofing and corrosion resistance onto steel and concrete substrates. Elastoline 7065.05 can be applied direct to metal over blasted steel to SA2.5. TENSILE STRENGTH
ELONGATION
IMPACT STRENGTH
HARDNESS, SHORE D
GEL TIME, SECONDS
18 N/mm ²
600%
>700 inch lbs
50
5
Home

About Elastothane

Gallery

Application Equipment

Contact Us

Foam & EPS Coatings

Metal Coatings

Wood Coatings

Concrete Coatings

Linings For Moulds

Hand Applied Polyurea

Pourable PU Foam

Spray PU Foam

Primers

Elastothane Ltd
Agric House
Long Lane
Fradley
WS13 8NT

TEL: 01283 791969
EMAIL: enquiries@elastothane.com


follow Us!